Products - Dutch Wire Cloth and Five Shaft Weave Wire Mesh

Dutch woven wire cloth is popularly used as filter cloth with micron openings. Stainless steel Dutch woven wire cloth normally goes from 24/110mesh to 325/2300mesh.

We also supply Five Heddle Weave wire cloth.

Materials: Materials of Dutch Woven Wire Cloth is divided into Type 302, Type 304, Type 304 L, Type 316 and Type 316 L. Stainless Steel Dutch Woven Wire Cloth offers good wear-resistance, heat-resistance, acid-resistance and corrosion resistance. Dutch Woven Wire Cloth in brass, nickel, steel or other metal materials also available at request.

Use: Stainless Steel Dutch Woven Wire Cloth is utilized as filter fittings for chemical industry, medicine, petroleum, telecom-communication, scientific research units and so on.

Weaving Patterns of Dutch Wire Cloth can be divided Dutch Plain Weaving, Dutch Twill Weaving or Dutch Reverse Weaving.

Dutch Twill Weave: Each weft wire passes alternately over two, and then under two successive warp wires and each warp wire passes alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter.

Five Heddle Weave: A limited sizes are available.


Dutch Wire Cloth Plain Woven
Gauge No.
Mesh/Inch(Warp x Weft)

Wire Diameter
(Warp x Weft)

Reference Aperture
(um)

Weight/sq
(kg)
32#
8 x 62
0.63mm x 0.45mm
300
5.42
40#
10 x 79
0.50mm x 0.355mm
250
3.16
48#
12 x 64
0.58mm x 0.40mm
280
2.9
55#
14 x 88
0.40mm x 0.30mm
180
2.54
76#
19 x 140
0.315mm x 0.20mm
140
1.88
80#
20 x
0.35mm x 0.20mm
-
3.6
95#
24 x 300
0.355mm x 0.25mm
120
2.45
100#
25 x 140
0.28mm x 0.20mm
100
1.95
120#
30 x 150
0.25mm x 0.18mm
80
1.68
140#
35 x 175
0.224mm x 0.16mm
71
1.52
160#
40 x 200
0.20mm x 0.14mm
60
1.40
180#
45 x 250
0.16mm x 0.112mm
56
1.09
200#
50 x 250
0.14mm x 0.11mm
53
1.04
220#
55.5 x 280
0.14mm x 0.10mm
50
0.92
240#
65 x 330
0.11mm x 0.08mm
36
0.71
280#(1)
70 x 350
0.11mm x 0.08mm
35
0.72
280#(2) 70 x 385 0.11mm x 0.07mm 32 0.75
300#
78 x 700
0.11mm x 0.08mm
30
1.39
315#(1)
80 x 400
0.10mm x 0.065mm
40
0.62
315#(2)
80 x 600
0.10mm x 0.06mm
-
-
315#(3)
80 x 800
0.15mm x 0.04mm
-
-
Roll width: 1-1.6m